How Long are Your Arms? Part 3, Thread and Borders

If you quilt I suspect you have studied a few methods for adding your sashings and borders. In this last installment I would like to introduce you to a method that is a little different. Kathie Hudak, owner of Quilt your Quilt, (a long arm quilter) has used this method for a long time and it turns out great each time. I will try this on my next quilt.
Vintage quilt from my collection. It is hand pieced and quilted. There is not one ripple in the sashing or the border. Made by Husbands Grandmother, I have no idea how she measured her finished quilts.

With Kathie's permission, I will post her method here.  It only requires two measurements, one horizontal across the middle and one vertical, across the middle!
  1. Essential truth, cut border fabric on the Lengthwise Grain. It is less stretchy than the crosswise grain. The crosswise grain will result in wavy borders. The quilting process, particularly on the long-arm machine will stretch the fabric even more. 
  2. Don't just sew on a border and cut it off when you get to the end. That's a recipe for wavy borders than cannot be quilted flat. 
  3. For Side Borders, cut 2 strips a little longer than the center length of the quilt. Lay both of these border strips across the middle and cut a 1/4 inch slit (like a notch) in them at the edges of the quilt top. Find the centers of the quilt top and the borders and mark with a pin. Pin them together matching the center pins and the slits with the edges of the quilt top. When pinned together if one piece is larger than the other, usually the quilt top, place the larger one on the bottom and allow the feed dogs to ease in the fullness. Sew the borders to both sides of the quilt top. Press the seam to the border and square off the ends with a rotary cutter and square ruler.
  4. Repeat for the Top and Bottom borders.
  5. Note for Row Quilts: To keep row quilts flat, all rows must be the same length. Sew the rows together matching the centers and edges, alternating the stitching direction on each long seam to prevent distortion. 
To visit Kathie's website go to www.quiltyourquilt.com

A word about thread. The long arm quilt uses the top and bobbin threads in the same color. Kathie suggests that you keep this in mind when choosing your backing fabric. High contrast is not always desirable, stops and starts may be too apparent.   She adds that the quilter will add an extra charge for special threads (variegated, etc.) and for changing colors. 

Gratuity Momeht: getting used to the new Blogger format, sort of. 

Comments